+- Chicas al Poder | Somos poderosas (http://www.chicasalpoder.com/foro)
+-- Foro: New ChicasAlPoder.com (/foro-New-ChicasAlPoder-com)
+--- Foro: FORO GENERAL, entra!!! (/foro-FORO-GENERAL-entra)
+--- Tema: refurbished UBE die casting machine (/tema-refurbished-UBE-die-casting-machine)
refurbished UBE die casting machine - momu207 - 16-07-2018 09:50 AM
With China's economy globalization,the demand of precise and high quality die casting parts is increasing. In order to solve this problem effectively,Weijin develops the advanced real-time control die casting machine. In addition to the curve display function,the embedded real time control system is also equipped with big-flow electrohydraulic valves,which can feedback the injection speed precisely.The provision of injection speed control curve in different phases,constant acceleration function in low-speed phase,brake function in fast injection phase,could provide customers with powerful die casting control technology and satisfy the complex and high quality die casting production requirement.
Real Time Control Die Casting Machine Advantage
Whole process close loop control to ensure product quality repeatability
Multi-stage speed control to provide flexible process control setting
Constant acceleration slow speed injection to reduce porosity defect
High speed end brake function to reduce flash and improve product surface quality
There are 5 stages to control the slow speed
Injection start and slow speed inject no pressure fluctuation to avoid air trapped
Switching time from slow speed to high speed ≤15ms
The shortest speed-raising time to meet the perfect process and reduce the trapped air
The system could provide several deceleration way
High speed brake function to avoid knocking force and flash to prolong mould service life
Weijin DC800T Cold Chamber Die Casting Machine
ITEM Unit DC800T
Clamping Force KN 8000
Clamping Stroke mm 760
Die Thickness (Min-Max) mm 400-950
Platen Size(HxV) mm 1400X1395
Space Between Tie Bars(W×H) mm 910X910
Tie Bar Diameter mm 180
Injection Force KN 665
Injection Stroke mm 830
Diameter Of Plunger mm 80/90/100
Shot Weight (Al) Kg 7.2/9.1/11.2
Casting Pressure (Intensification) Mpa 132/105/85
Max Casting Area (40Mpa) cm² 2000
Injection position mm 0, -140,-280
Plunger Penetration mm 297
Casting Flange Diameter mm 210
Casting Flange Protrusion mm 20
Ejection Force KN 315
Ejection Stroke mm 180
System Working Pressure Mpa 16
Motor Power Kw 45
Oil Tank Capacity L 1200
Machine Weight Ton 39.4
Machine Dimension mm 9000x2300x3100 refurbished UBE die casting machine
website:http://www.weijindiecastingmachine.com/real-time-control-die-casting-machine/real-time-control-cold-chamber-die-casting-machine/